VFD Display Produktinformationen

vfd page header image

Topics Covered:

Newhaven Display VF-Glass and VF-Module Displays

VFDs (Vacuum Fluorescent Displays) are high contrast displays that can display 7-segment numerals, multi-segment alphanumeric characters or a dot matrix pattern. These display types are typically colored green, bright and perform well in both dark and full sunlight environments. VFDs use a self-emitting fluorescent light allowing them to operate in extreme cold and hot temperatures. VFDs are commonly used in consumer based electronics such as car radios, ovens and DVD/Blue-ray players.

example images of the glass vfd displays

Newhaven Display offers both glass and module type VFDs. The glass VFDs are available in standard sizes and come as either 7-segmented, alphanumeric or Dot Matrix displays.

example images of the vf-module displays

Newhaven Display's module VFDs are available in standard sizes and feature a PCB board with a built-in controller. These displays can be used as compatible replacements for LCD or OLED modules. Like the glass VFDs, they are available as alphanumeric or Dot Matrix displays. Newhaven Display offers custom design for both the glass and module type VFDs.

Back to Top

Key Features

  • LCD compatible
  • Wide operating temperatures (-40°C to +85°C)
  • Self-emitting
  • User definable fonts
  • +5V power supply
  • Colored filters available
  • RoHS Compliant

Back to Top

Understanding VFD Technology

VFD Structure

vfd structure image

VFDs are composed of a hot cathode filament, anode segments coated with phosphor and grids within a vacuum sealed glass encasement. The filament is made up of alkaline coated tungsten wires which enable the display to emit light.


  • Filament- The filament is the cathode in VFDs. It consists of a very thin tungsten wire coated with barium, strontium and calcium oxides. Application of a specified voltage raises the temperature of the filament which causes thermionic emission.

  • ITO Contact Lead- The ITO Contact Lead lets the inside transparent conductive layer of the Front Glass connect to filament voltage to prevent ESP effects.

  • Anode Electrode- The Anode Electrode generally consists of a graphic coated with phosphors. Both the graphic and the phosphors are conductors.

  • Insulation Layer- The Insulation Layer electrically insulates the anode/grid electrode from wiring patterns.

  • Wiring Pattern- The Wiring Pattern connects anode/grid electrodes to the metal leads.

  • Grid- The Grid is a metal mesh over the phosphor coated anodes and controls the electrons emitted from the cathode.

  • Glass Substrate- The Glass Substrate is used to form the wiring pattern and other patterns.

  • Leads Getter- The Leads Getter is important in maintaining a high vacuum level in the inside of the VFD after the exhausting process.

  • Exhaust Tip- The Exhaust Tip is used to remove the gasses from inside of the VFD during the production process.

  • Front Glass- The Front Glass is used together with a glass substrate to form a vacuum sealed package.

  • Frit Glass- The Frit Glass will melt after heated to fix and seal the front glass and glass substrate together.

  • Phosphors- Collided by the electrons emitted by the filament, the phosphor is excited and emits light.

  • Through Hole- The Through Hole is formed on the insulating layer connecting the anode electrode to the wiring pattern.

  • Transparent Conductive Layer- The Transparent Conductive Layer is formed on the inside of the front glass. It protects the display from external electrostatic effects.

Back to Top

How VFDs Work

VFD Principle Image

When heat generated by a power supply is applied to the tungsten wires, the alkaline coating emits electrons. These electrons are controlled and diffused by the thin metal grids within the display. When these electrons come in contact with the phosphor coated plates they emit light.


  • Cathode- The Cathode (Filament) is the barium oxide coated tungsten wire which is heated by the external power source to approximately 600°C and emits free thermal electrons.

  • Grid- The Grid is a metal mesh over the phosphor coated anodes and controls the electrons emitted from the cathode.

  • Electrons- In the case of non-light emission, electrons from the cathode are either blocked by the grid with a negative potential, or passed through the grid and repelled by the negative potential anode. In the case of light emission, electrons from the cathode are accelerated by the positively charged grid toward the positively charged anode. The phosphor on the anode emits luminous radiation when excited by electrons.

Back to Top

VFD Color Filters

Color filters can be applied to any VFD to change the overall look of the display. These filters alter the color of the VFD and increase the contrast ratio, as well as act as a protective shield.

image of the different filters offered
    Some colors available include:
    - Red
    - Rose
    - Blue
    - Violet
    - Green

Back to Top